Skip to content
FIContact usQuote request 0
Coag-Sense, all products from this manufacturer

Coag-Sense PT2

PT/INR meter for professional use in monitoring warfarin therapy. Result from a 10–12 µl fingertip sample in less than a minute.

Ask a specialist

Add the product to your quote request and we will tell you the price and delivery time.

  • INR 0.8–8.0, result in seconds and as INR
  • Sample 10–12 µl from the fingertip, result in less than a minute
  • Memory for 2.000 patient results and 1.000 user IDs
Coag-Sense PT2 meter: colour touch screen and strip port at the bottom edge

How the Coag-Sense PT2 measures

The test strip contains a small wheel that draws the sample into the reaction well and mixes it with dried thromboplastin. When a clot forms, it interrupts a light beam, and the meter reports the prothrombin time in seconds and as an INR value based on the strip lot data.

The meter is intended for healthcare professionals for monitoring warfarin-type therapy (vitamin K antagonists). It is not used for monitoring patients receiving heparin or direct oral anticoagulants (DOACs), nor for screening.

The strip lot data are read from the NFC tag in the pack. The meter checks itself at start-up and for each strip, and it needs no calibration or maintenance. Results are transferred to middleware using the POCT1-A protocol over USB, Ethernet, Wi-Fi or Bluetooth.

Specifications

Measurement

Method
Mechanical clot detection in the test strip
Measuring range
INR 0.8–8.0, PT 8–80 s
Sample
Fresh capillary blood from the fingertip, 10–12 µl
Time to result
Less than 1 min, strip warm-up 25 s
Haematocrit
15–60 %
Precision
CV approx. 2.5%
Quality control
Low and high control strips, QC lockout

Instrument

Display
Colour touch screen
Memory
2.000 patient results, 500 control results, 1.000 users
Interfaces
USB, Ethernet, Wi-Fi, Bluetooth; POCT1-A
Power
Built-in lithium polymer battery, approx. 100 tests per charge; power adapter 100–240 V
Dimensions and weight
152 × 100 × 29.5 mm, 315 g
Operating environment
18–32 °C, 10–90% RH

Documents

We supply other documents on request.

Request documents by emailCoag-Sense: all documents

How the clot is detected

The meter measures prothrombin time directly rather than calculating it from tables or a curve. Strip lots are calibrated traceably to the WHO manual tilt tube method (rTF/16).

In the manufacturer's study, 99.2% of results were within 0.5 INR units of the tilt tube method, and the mean CV of duplicate measurements was 2.4%.

  1. Sample10–12 µl of capillary blood into the strip well
  2. MixingThe rotor mixes the sample with thromboplastin
  3. ClotA clot forms on the surface of the rotor
  4. Light beamThe clot interrupts the light beam
  5. ResultTrue PT in seconds, and INR

Accessories

Slides and panels

  • Test strip pack50 test strips, 2 low and 2 high control strips, activation solution, 54 sample transfer tubes and an NFC tag50 strips, code 03P56-50

Controls and calibrators

  • Control stripsLow and high control and activation solution. Run for each new strip lot.10 pcs, code 03P69-10

Consumables

  • Sample transfer tubesVacuum tubes, filled to the green mark54 pcs, code 03P52-57
  • Lancets 21 GSingle-use safety lancets. Do not use smaller diabetes lancets.100 pcs, code 03P58-04
  • Printer paper2-inch thermal paper5 rolls, code PD-99906

Optional accessories

  • Portable printerUSB, Bluetooth and Wi-Fi; thermal paper or labelscode 03P76-01
  • Barcode readerFor reading patient and user IDs, USB or Bluetoothcode 03P78-01
  • Carrying casecode 03P75-01

We install, train and service.

The same specialist handles commissioning and is still there for service years later.

Service and support on weekdays 8.30–16.00+358 10 841 1600huolto@diagnostica.fiRequest service
Coag-Sense PT2